Kayak Cart Heavy Duty Beach Wheels 9 inch 30 to 34 inch Axle kit

Description

CONSUMER WARNING!
Many sellers that claim to offer a similar product for a far lesser price are stretching the facts as to the performance standards of their product in a beach sand environment. Facts regarding beach wheels alone are if you are not using some form of a TRUE low air pressure balloon tire, regardless if it is our product or another brand, you are going to be extremely disappointed with the performance of that item and will be wasting your time and money. Our statement may be a little bias, however our experience is if you are going to move anything over 30 lbs through dry soft beach sand without a proper beach, balloon or sand tire, YOU WILL BE DRAGGING IT!……. So Buyer BEWARE!!! Please view our video link below for demonstration.
Watch The Beach Wheels in Action
This is a low air pressure 9 inch Heavy Duty polyurethane non bearing beach wheel and axle kit. Perfect for hauling kayaks, paddle boards, coolers, or any other equipment over soft beach sand terrain. BRAND NEW! Never been used.
Send us a message selecting one axle size from 3 different axle lengths, 30", 32", 34", inches. Each kit  comes complete with two heavy duty polyurethane 9 inch beach sand tires, one solid 3/4th inch aluminum axle, two stainless steel cotter hair pins, two stainless steel flat washers, and two nylon flat washers.
It's all about the beach wheels baby. There is truly nothing on the market that comes close to what they can do. Other options fall short of this important feature. We have done test after test looking for the BEST options to move large loads across soft beach sand and other surfaces. Designed to flatten and hover over deep soft beach sand instead of digging a trench into it. Anything less is like pulling a stack bricks through molasses. Do not make the common mistake comparing a non balloon or airless tire to roll through dry soft beach sand.
It is important to realize with lower air pressure you may sacrifice some stability. Just adjust your tire pressure based on the conditions you are using them. This beach wheel axle kit can support a max payload of 242 pounds. It is advised to use with caution in heavy vegetation with thorns or sharp sticks under heavy loads. These low pressure pneumatic tires are designed for off road at a walking pace. We can NOT guarantees the ability, fitness, or physical strength of any customer or user to move any specified weight payload across any type of surface. The payload weight limitations on each wheel are the limitations for the tire itself. As a frame of reference use the color guide chart in the item photos or watch the demo video in the video link above.
Proper Care & Use
1. Do NOT overload beyond the 121 lb. weight load capacity, as stated on each wheel.
2. Do NOT over inflate the beach wheels beyond the 3 PSI as stated on each wheel. Use a low pressure tire gauge to determine proper air pressure.
3. Do NOT use pressurized air to fill the beach wheels. Use a manual bicycle pump.
4. Do NOT leave large heavy loads on the tire for extended periods of time. This could cause the tire to deform.
5. Do NOT Store outdoors over long periods of time in the direct sun. Prolonged direct exposure to sunlight could decrease the strength of the polyurethane tires.
Following these simple instructions above will allow you to keep your wheels in top condition for years. We are using wheels well over 5 years old with no maintenance.
Beach Wheel Specifications:
Polyurethane Tire approx. 9 inches diameter upon air pressure, 4 inches wide
PVC Wheel Hub 4.5 inches diameter. 4 inches in wide.
Max wheel payload 121 lbs. per wheel ( DO NOT OVERLOAD )
Pressure range 2 - 3 PSI ( DO NOT OVERINFLATE! )
Schrader (Bicycle) air valve stem and cap.
Axle Specifications:
3/4th thick Solid Aluminum
30, 32, 34,  inches length
Hardware Specifications:
Two Stainless Steel Cotter Hair Pins
Two Stainless Steel Flat Washers 3/4ths inches
Two Nylon Flat Washers 3/4ths inches