-40%
Universal 1/2
Universal 1/2
Universal 1/2
Universal 1/2

Universal 1/2" Molded Fuel Line Cut-Your-Own Rubber Hose Elbow 45° 90° 180° 12.5

$ 12.11

Availability: 75 in stock
  • Surface Finish: Fiber Reinforced NBR Nitrile Rubber
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • Manufacturer Part Number: RMI-33010
  • Condition: New
  • Type: J30R7
  • Shape: Elbow, Bend, U, Turn, Angle, Bent
  • Returns Accepted: Returns Accepted
  • Size: 1/2", 0.500", 12.5mm
  • Applictions: Gasoline Hose, PCV Valve, Fuel Injection
  • Brand: RetroMotion Innovations
  • Country/Region of Manufacture: Taiwan
  • Material: Rubber
  • Used on: Boat, Hot Rod, Classic Car, Motorcycle Tanks
  • Return shipping will be paid by: Buyer

    Description

    This is a custom shaped fuel line available exclusively from us at RetroMotion Innovations! We designed this "swan shape" molded hose to be cut to a variety of shapes needed to route fuel or oil.  It can be cut into 4 pieces for your project to give you 45, 90, 135, and 180 degree bends.
    Reinforced molded rubber hose for carburetors and fuel injection systems with up to 75 PSI working pressure.  This will fit 1/2" and 12.5mm hose barbs and hard fuel supply lines from tanks to carburetors.  This is fuel-grade hose that meets the SAE J30R7 specifications.  You can cut any section out of this hose and use any part of it, just trim to length or shape and tighten with hose clamps (clamps not provided).  If desired, any printing on the hose can be wiped away with lacquer thinner for a cleaner look.
    Dimensions:
    Inner Diameter: .500" (12.5 mm)
    Outer Diameter: .75"
    Specs:
    Built to SAE J30R7 For Permeability
    Working pressure: 75PSI
    Burst Pressure: 250 PSI
    Temperature Range: -40°F to +257°F (-40°C to +125°C)
    Applications: Fuel Injection, Low Pressure Gasoline, Diesel, Ethanol E10, E85, PCV Emissions Hose, Oil